- Low attenuation carbon fiber tabletop with innovative design
- Face cutout for comfortable prone positioning
- Low profile base for C-Arm clearance
- Free-float X-Y tabletop
- 500-lb patient capacity
- High-speed actuator for quick vertical movement
- Accessory Rails
The NEW Surgical C-Arm Table - 846 features a
free-float tabletop design that allows for quick and comfortable
patient positioning at an affordable price.
Excellent for image-guided procedures
Its large radiolucent area,
motorized actuation of height and free-float tabletop make it ideal
for both pain care and cardiovascular applications. The tabletops
innovative contour design combines the advantages of square and
contoured tabletops, offering additional space at the head-end
of the table, while enabling the user to get the C-Arm close to
the cervical spine for greater image resolution.
Automatic positioning
with free-float
A portable hand-held controller can be positioned
for convenient access from any point around the table. The portable
hand-held controller offers the freedom to adjust height from locations
away from the table. The controller hangs on an accessory rail
when not in use. A push-button release for the free-float feature
is located at the end of a handgrip that can be placed at any point
on the OR accessory rail.
Accommodates portable or ceiling-suspended
C-Arms
Designed for procedures where stability, access and
precise, quiet, vibration-free positioning are essential. A cantilevered
low attenuation carbon fiber tabletop accommodates portable or ceiling-suspended
C-Arms. The radiolucent area is free of cross members allowing full
fluoroscopic visualization and unobstructed C-Arm positioning. Functional
design provides complete access with reduced radiation exposure
to clinicians. Two-inch thick table padding and three adjustable
straps with Velcro® hook and loop fastening assure patient comfort
and stability. A face cutout is provided for prone positioning.
- Dimensions: 104" l x 26" w (260
x 66 cm) with OR accessory rails
- Tabletop: 101" l x 24" w (252
x 61 cm)
- Radiolucent Area:
51" l x 24" w (128 x 61 cm) unobstructed head to accessory
rail
20" l x 17.5" w (50.8 x 44 cm) additional, between
accessory rails
- Radiolucent Area: Total Length: 71" l
(178 cm)
- Tabletop Material:
Carbon Fiber with integral head section
- Mattress: 2" thick
(5 cm)
- Attenuation:
Tabletop: .7 mm Aluminum equivalence
Mattress: .5 mm Aluminum equivalence
- Motions:
Height: Adjustable from 33.5" to 43.5" (84 to 109 cm)
Tabletop X Motion (head-to-toe float): 20" (51 cm)
Tabletop Y Motion (side-to-side float): 10" (25.4 cm)
- Controls:
Hand Control: height
Push Button: releases X-Y Tabletop motions
- Wheels:
Head End – 3" (7.62 cm) swivel casters, integral locking
system on base
Foot End – 5" (12.7 cm) swivel casters with central
locking
- Accessory Rails: Standard OR accessory rails
49.5" x 1.12" x
.375" (124 x 2.86 x .95 cm) mounted near foot end of table
- Patient Restraints:
Three body straps
- Patient Capacity: 500 lb (227 kg); weight tested
to four times the patient load rating.
- Lift Capacity: May vary between 460 lb - 500 lb
(209-227 kg) based on line voltage
- Power: 115 VAC or 230 VAC
- Warranty: one year
- Certifications: ETL and cETL listed to UL-2601-1®,
CAN/CSA© C22.2
No.: 601-1-M90 and EN 60601-1
Which C-Arm Table is right for you?
Compare
 |
|
| 058-846 |
Table,
Surgical C-Arm - 846, 115 VAC |
$19,900.00 |
|
|
| 058-847 |
Table,
Surgical C-Arm - 846, 230 VAC |
19,900.00 |
|
|
Optional:
|
|
| 058-848 |
Catheter Tray
Extension (removable) |
$400.00 |
|
|
| 056-850 |
IV Pole, Rail
Mounted |
390.00 |
|
|
| 056-865 |
Arm Board, Carbon
Fiber, one arm |
600.00 |
|
|
| 056-866 |
Arm Board, Carbon
Fiber, two arms
Fits Surgical C-Arm Tables 840, 846 and 870 Pain Management Table |
1,150.00 |
|
|
| 058-856 |
Radiation Shield, Head/Cervical |
1,595.00 |
|
|
| 058-857 |
Radiation Shield, Thoracic/AB |
1,695.00 |
|
|
| 058-849 |
Clamp, Accessory, C-Arm Table |
695.00 |
|
|
|
| Innovative Contour Design Top: Biodex C-Arm tables
feature a uniquely contoured tabletop. This design fully accommodates
C-Arm positioning for closest possible access to the cervical
spine, achieving optimum image resolution. A second benefit
to the contour design is the added workspace at the head end,
while maintaining the narrowness required for cervical procedures.
|
As required by law, all Biodex
C-Arm tables are CDRH registered and FDA Device Listed. All
motorized tables are ETL product listed to the
UL-2601-1 Medical Electrical Equipment Safety Standard. |
 |
| |
|
Protect yourself from scatter radiation. Biodex offers maximum protection Scatter Radiation Shields, designed to fit all Biodex C-Arm tables. These shields are custom fitted to match the unique contours of the Biodex tabletop. Constructed of 0.5 mm lead equivalent panels, the shields do not impede C-Arm access.
There are two shields available. One is designed to be used at the head end of the table for head and cervical procedures. The other is used at the main section of the table during thoracic or abdominal procedures.
The shields are easy to add or remove as needed. There are no attachment parts necessary, no metal to obscure the image. The shields simply drape over the tabletop, beneath the mattress. Shields are purchased individually and may used in combination for total protection or for select region of interest.
|
 |
| |
|
The Biodex C-arm Table Accessory Clamp is designed to mount to all Biodex carbon fiber top C-arm tables. It is used to attach a table accessory, such as arm boards or fistula boards that require standard OR accessory railing. The clamp will accommodate any standard OR locking block, and can be placed anywhere along the length of the table to provide six inches of OR accessory rail.
|
 |
| |
|
Carbon Fiber Arm Boards are completely radiolucent with no metal parts to obscure the image. They are the perfect accessory for studies when “chasing the bolus” from the injection site is required. The body of the arm board slides under the table mattress and is held in place by the weight of the patient. Both single and double sided arm boards are available. |
|
